UBCD also includes Seatools, Hitachi Drive Fitness Test, and several other vendor-specific tests. Includes a partedmagic drive health utility that reports the SMART data (such as run hours and URE) and allows you to run the disk's internal self-test. Otherwise, your computer may not boot at all.We just inventoried a few dozen used drives. Once you are done testing your hard drive, remember to enter the BIOS setup again and change the SATA operation mode back to AHCI. Once in the BIOS setup, find the SATA operation and change it to ATA instead of AHCI. Note that the key to enter the BIOS setup might be different on your machine consult the user manual for your computer for the correct key. To change the settings, you need to enter the BIOS setup by entering F2 while the machine boots up. On this model, I had to set the SATA operation mode to ATA in order for the SeaTools to run. Later, I learned that the problem was with the SATA operation mode. That did not work either it produced the same error message. I even downloaded the SeaTools from Seagate directly and made a USB stick with it. I downloaded the latest version, and it did not help. I thought the problem might be because the version was an older version on the Ultimate Boot CD. The SeaTools did not load at all, and I got the following error message: “Invalid Opcode at xxxx xxxx …” I suspected it was a hard drive problem, so I ran Ultimate Boot CD and selected the SeaTools to test the hard drive. The computer crashed, and the OS was completely gone. I was working on a Dell Inspiron 1545 laptop.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |